Extruder Type: Conical twin-screw, counter-rotating, intermeshing; Model Options: 80/156 (small-end 80 mm / large-end 156 mm) / 92/188; Screw Material: Nitrided steel, HV≥740 (flight), HV≥940 (barrel); Barrel Liner: Bimetallic, Xaloy X-800 equivalent, 58–62 HRC
Extruder Type: Single-screw, vented, 33:1 L/D; Screw Diameter: 120 mm (also available: 90mm, 105mm, 150mm); Screw Material: Nitrided steel, 950 HV, chrome-plated; Barrel Material: Bimetallic liner, 58-62 HRC
Extruder Type: Single-screw, large-diameter low-speed design; Screw Diameter Options: 120 mm / 130 mm; Screw Material: 38CrMoAlA nitrided steel; Nitrided Layer Depth: 0.5–0.7 mm
Available Configurations: Standard ABS line (300-600 kg/h) / Refrigerator-grade line (1,000-3,000 kg/h); Screw Diameter Options: 90 mm / 105 mm / 120 mm / 150 mm / 200 mm; Output Range (configuration dependent): 300 – 3,000 kg/h
Extruder Type: Single-screw, large-diameter low-speed design; Screw Diameter Options: 120 mm / 130 mm / 150 mm; Screw Material: 38CrMoAlA nitrided steel; Nitrided Layer Depth: 0.5–0.7 mm
Screw Diameter Options: 120 mm / 130 mm / 150 mm; Output Range: 300 – 800 kg/h (material and configuration dependent); Materials: PP, HIPS, GPPS (recipe-based changeover)
Extruder Type: Twin-screw, co-rotating, modular / Intermeshing, self-wiping profile; Screw Diameter: 52 mm (also: 65 mm, 75 mm) / Scaled to output requirement; L/D Ratio: 33:1 / Extended for gentle, complete plastication; Screw Material: Nitrided 38CrMoAlA / Bimetallic CPM-10V / Bimetallic recommend
Extruder Type: Co-rotating twin screw, 40:1 L/D (extended for degassing); Screw Diameter: 75 mm (also available: 65mm, 92mm); Screw Material: 38CrMoAlA, nitrided 0.5–0.7mm depth; Output Capacity: 500 – 1,200 kg/h
Jwell Machinery Co., Ltd sets up in 1997 , we are large manufacturer of plastic extrusion machinery in China, our headoffice was located in Shanghai.
SOLUTIONS
PRODUCTS
CONTACT
Copyright © Jwell Machinery Co., Ltd 2026. All rights reserved. Privacy Policy | Terms & Conditions | Site Map