PS HIPS GPPS Sheet Extrusion Line
Extruder Type: Single-screw, large-diameter low-speed design; Screw Diameter Options: 120 mm / 130 mm / 150 mm; Screw Material: 38CrMoAlA nitrided steel; Nitrided Layer Depth: 0.5–0.7 mm
Extruder Type: Single-screw, large-diameter low-speed design; Screw Diameter Options: 120 mm / 130 mm / 150 mm; Screw Material: 38CrMoAlA nitrided steel; Nitrided Layer Depth: 0.5–0.7 mm
Screw Diameter Options: 120 mm / 130 mm / 150 mm; Output Range: 300 – 800 kg/h (material and configuration dependent); Materials: PP, HIPS, GPPS (recipe-based changeover)
Extruder Type: Twin-screw, co-rotating, modular / Intermeshing, self-wiping profile; Screw Diameter: 52 mm (also: 65 mm, 75 mm) / Scaled to output requirement; L/D Ratio: 33:1 / Extended for gentle, complete plastication; Screw Material: Nitrided 38CrMoAlA / Bimetallic CPM-10V / Bimetallic recommend
Extruder Type: Co-rotating twin screw, 40:1 L/D (extended for degassing); Screw Diameter: 75 mm (also available: 65mm, 92mm); Screw Material: 38CrMoAlA, nitrided 0.5–0.7mm depth; Output Capacity: 500 – 1,200 kg/h
Available Models: JWPET-75, JWPET-92, JWPET-120 (screw diameter based)
Screw Diameter Options: 52mm / 65mm / 75mm / 92mm
Output Range (model dependent): 500 – 1,200 kg/h
Jwell Machinery Co., Ltd sets up in 1997 , we are large manufacturer of plastic extrusion machinery in China, our headoffice was located in Shanghai.
SOLUTIONS
PRODUCTS
CONTACT
Copyright © Jwell Machinery Co., Ltd 2026. All rights reserved. Privacy Policy | Terms & Conditions | Site Map